Joysticks
Stock potentiometer replacements, or a magnetic upgrade—Hall Effect, TMR, or GuliKit.
R300 / R400
Stock replacement
OEM-style potentiometer sticks — one side, or both.
We replace worn DualSense analog modules with fresh stock-style potentiometer sticks. R300 if only one side drifts. R400 if both sticks need it. Need worn thumbstick caps replaced? We can supply and fit new rubber tops at R50 each while the pad is open.
Best for: Players who want the original DualSense stick feel back, without stepping up to a magnetic kit.
- R300 — one side
- R400 — both sides
- Stock-style carbon-film potentiometer modules
- Soldered in, then centred and range-checked
- Optional thumbstick caps — R50 each, fitted while open
Full details
These are the same kind of mechanical sticks a DualSense ships with. The coloured blocks on the module are the potentiometers. Carbon wear in those pots is what causes stick drift, so a stock swap can drift again later.
Hall Effect and TMR are the longer-term step up when you want contactless sensing. Not for DualSense Edge — Edge sticks are a different module.
Tech notes
- Controller: PS5 DualSense
- Technology: stock potentiometer modules
- Price: R300 one side · R400 both sides
- Not for: DualSense Edge
R550
K-Silver Hall Effect
Entry magnetic upgrade — contactless sensing that stops carbon-trace wear.
K-Silver Hall Effect modules replace the stock DualSense potentiometer sticks with magnetic Hall sensors. There is no rubbing carbon film to wear through, which is the usual cause of stick drift on OEM pads. Need worn thumbstick caps replaced? We can supply and fit new rubber tops at R50 each while the pad is open (these modules don’t include caps, unlike GuliKit kits).
Best for: Players who want a proven anti-drift upgrade at the lowest magnetic price point, with a feel close to a stock DualSense.
- Hall Effect magnetic sensing (no potentiometer wear path)
- Direct DualSense module replacement
- Installed, calibrated, and bench-tested before return
- Strong value step up from a stock stick swap
- Optional thumbstick caps — R50 each, fitted while open
Full details
Stock DualSense sticks use mechanical potentiometers. Over time the carbon traces wear and the controller reports a false offset—classic stick drift. Hall Effect modules read position with a magnet and sensor instead, so that friction path is gone.
This is our most affordable magnetic option. You still get solder-in modules, full calibration, and warranty-backed labour—without stepping up to TMR pricing.
After install we calibrate circularity and centre, then verify inputs on the bench (and you can re-check anytime with our in-browser stick tools).
Tech notes
- Technology: Hall Effect (magnetic, contactless)
- Controller: PS5 DualSense
- Labour: desolder, install, calibrate, QA
R650
K-Silver TMR
JS13 Pro+ Tunnel Magnetoresistance — smoother, lower power, competitive favourite.
K-Silver JS13 Pro+ TMR modules use Tunnel Magnetoresistance sensors. Community and shop feedback often call them smoother and more linear than older Hall kits, with very low power draw (~200μA-class chips) and multi-million-cycle durability claims. Need worn thumbstick caps replaced? We can supply and fit new rubber tops at R50 each while the pad is open (these modules don’t include caps, unlike GuliKit kits).
Best for: Competitive FPS / aim-heavy play where micro-adjustments and a butter-smooth feel matter, without jumping to a premium GuliKit kit.
- TMR (Tunnel Magnetoresistance) sensing — next step past classic Hall Effect
- JS13 Pro+ form factor for DualSense
- Typically lighter, smoother tension than stock ALPS
- Low power draw vs many Hall designs; long service life
- Optional thumbstick caps — R50 each, fitted while open
Full details
TMR and Hall Effect are both contactless magnetic technologies. TMR generally offers finer resolution, better temperature stability, and lower current draw—important on a DualSense that already pushes the battery with haptics and adaptive triggers.
K-Silver’s JS13 Pro+ line is widely used by repair shops. Reviewers often note near-stock tension with a smoother shaft feel thanks to on-shaft magnet designs, plus strong circularity after proper calibration.
We install a matched pair, calibrate centre/circularity on DualSense tooling, and stress-test L3/R3 clicks before the pad leaves the bench.
Tech notes
- Technology: TMR (JS13 Pro+ class)
- Typical claims: ~5M+ rotations, ≤~3% centre accuracy when calibrated
- Controller: PS5 DualSense
R850
GuliKit TMR
Brand-name GuliKit fixed-tension TMR — stock-like firmness with premium build.
GuliKit popularised controller TMR sticks (often sold as NS51 for DualSense). Fixed tension, premium housings, and a feel many players describe as closer to factory DualSense firmness than lighter third-party kits.
Best for: Players who want a trusted brand kit with stock-like tension and don’t need adjustable resistance or multi-height caps.
- Official GuliKit TMR modules (fixed tension)
- Contactless sensing — drift-resistant magnetic tracking
- Premium caps / metal-stem feel on many kits
- Direct DualSense replacement install + full calibration
Full details
GuliKit’s TMR line evolved from their earlier Hall Effect patents. Sensors track a magnet without carbon wear, with low power consumption designed to play nicely alongside DualSense haptics and adaptive triggers.
Compared with K-Silver, many players find GuliKit tension closer to OEM ALPS firmness—useful if you dislike a “loose” stick after an upgrade.
Installation still means full module replacement (not partial sensor swaps), soldering, and post-install calibration (e.g. dualshock-tools / GuliKit test flows). We handle that end-to-end.
Tech notes
- Technology: GuliKit TMR (fixed tension / NS51-class)
- Tension: fixed (non-adjustable)
- Controller: PS5 DualSense
R1 100
GuliKit TMR Tensionable
720° adjustable tension plus three stick heights — the fully tunable DualSense setup.
GuliKit’s adjustable-tension TMR kit (NS55 / 720° class) lets you dial stick resistance with a hidden adjuster under the cap, and ships with three pairs of caps at different heights so you can tune throw and feel per game.
Best for: Enthusiasts who want to fine-tune stick weight and height—FPS vs racing vs hybrid play—on one premium TMR install.
- 720° stepless tension adjustment (tool under the cap)
- Three pairs of caps at different heights / feels
- Same contactless TMR anti-drift sensing as GuliKit’s premium line
- Hidden adjuster so tension doesn’t shift mid-match
Full details
Remove the thumbstick cap and use the included adjuster on the +/- mechanism to set resistance across roughly two full turns (720°). Mid tension is usually closest to stock; lighter settings can feel unstable at dead-centre if you run near-zero inner deadzones.
The multi-height caps change leverage and travel feel—shorter for snappy aim, taller for more throw and precision. Cap swaps are vertical press/pull; we set a sensible default on the bench and show you how to change it.
Community notes: don’t wind tension all the way to minimum (the internal cylinder can drop out—reversible), and avoid overtightening. We install carefully, calibrate, and verify clicks and range before return.
Tech notes
- Technology: GuliKit TMR with 720° adjustable tension
- Includes: 3× height variants of thumbstick caps + adjuster
- Controller: PS5 DualSense